November 16, 2026

Let’s Talk About Mistakes

         One of the things about carving rubber blocks is that you can always carve out more, but you can never put back a part that got carved out.  (If you want to see my experiment in which I attempted to fill back in an area on a block, you can check out my post A Couple of Experiments.)  In other words, in relief block printing there’s no eraser, no backspace, no cover-up.  When I teach block printmaking, people often ask what to do if you make a mistake in carving, and I generally tell them that there are four basic options.
        1.  Ignore it.  Probably no one else will even notice that it wasn’t what you originally intended.
        2.  Tweak your design so that the mistakenly carved area is now part of an area that is supposed to be carved away.
        3.  After printing, paint in the missing bit individually on each impression.  (This works best when you cut through a line, or carve out a small, well-defined area.)
        4.  Start all over and re-carve the block from scratch.
        Funnily enough, I’ve had to do each of these options (or at least some version of them) in the series of block prints I’ve been working on this fall.  That makes a fine opportunity to show you that yes, mistakes are made, and yes, they’re not usually actually a catastrophe.
        
In case you’re curious about this series I’ve been working on, my previous post on The Preposterous Tarot explains what it’s all about.  If you’re wondering why I’ve been making so many mistakes, that’s at least in part because all my recent carving has been done during shows.  I always carve during shows because people like to see the demonstration and learn how I work, and because when I’m not busy with visitors I like having something to keep me occupied so I’m not going crazy with boredom.  Plus, when people are looking at my art but not talking to me, as long as I’m carving I’m not sitting there staring at them, making everyone feel awkward.  It’s a win for everyone and it works really well.  But the one downside is that I definitely do make more mistakes in my carving when my attention is continually pulled into interactions with visitors - plus the lighting is pretty bad at a lot of shows!
        I had to use a sort of combination of correction Options 1 and 2 on The Ebullient Lacemaker.  The mistake is that I carved away part of the area that was supposed to be her (black) skirt, thus turning it into her (white) apron.  Would it have been better as intended?  I’ve added a mock-up of how it was supposed to be, for comparison, but the truth is that if I weren’t telling you now, no one would know this was a mistake.  So, the “problem” was solved by just letting it be (Option 1), or you can think of it as solving the problem via Option 2 by adjusting the design so that now the mistakenly carved area on the skirt is part of the apron instead.
        
Option 3 can be seen on The Cantankerous Gnomon.  The thing about words on prints is that they have to be carved backwards.  Normally this isn’t really as big a deal as people assume, because you write them forwards on your design, they automatically turn backwards when the design is transferred to rubber, and then they automatically turn back forwards again when you print.  All you have to do is follow the carving guide on the rubber and everything will come out fine.  But the one problem with carving backwards is that it is much harder to notice a mistake as you’re working.  In this case, my transferred design was small and a little blurry, the light wasn’t great, and I thought I was supposed to be carving an R, when in fact it was supposed to be a K.  So when I did a test print I discovered that I had carved “CANTANREROUS.”  And the other thing about words is that unlike a lot things (such as skirts and aprons), they really do have to be correct.  A misspelled word is not something you can ignore and hope people think it was supposed to be that way, and nor is it something you can fix by carving out even more, or  by deciding to write a different word instead.  What I ended up doing to fix The “Cantanrerous” Gnomon was straightening the upper line on the rogue R, and then after printing the complete edition, I took a very fine brush and painted ink over the curved line that closed the loop at the top of the R, turning them all back into Ks again.  Problem solved.  Whew!
        
Option 4 is the extreme reaction, and I’m actually not sure I’ve ever done it fully.  Over the years I’ve carved three or four blocks that I was so completely unsatisfied with that I never printed them at all —  but by that time I had also lost the desire to carve all over again, so I simply abandoned them altogether.  In the case of The Well-Varnished Manticore, however, I was able to do a less extreme version.  After carving the block, I realized that I’d numbered it XIX instead of XIV.  I couldn’t use Option 1 and let it stay as XIX, because The Cantankerous Gnomon had already claimed that number.  I couldn’t use Option 2 and turn the erroneous X into some other number, and nor could I carve it away completely, because I wanted a different card to be numbered XI (and the centering would have been off).  If I wanted to use Option 3 it would have required painting a whole V by hand on each print, which would likely not have come out as accurate as I would like.  However, because this error, major as it was, occurred in a clearly defined space, I could cut out a plug of rubber with the offending X, and slide in a new plug of rubber in its place.  In fact, I didn't have to carve a fresh V from scratch because I cut the V out of The Numinous Mailman and stuck it into the Manticore’s block just as if I were printing with moveable type.  In the finished edition you can see the tiny nicks from where I cut out the little block of rubber, but otherwise it worked beautifully.  Problem solved.  Whew!
        I’ve got three more shows this year for the spate of holiday sales, and I plan to carve the next 5-7 blocks in the series as I sit there on the first two weekends of December.  Naturally, I hope I don’t make any mistakes!  But at least this last crop of errors has given me the useful opportunity to illustrate a sort of artistic resilience.  I hope it was helpful.
        Speaking of holiday sales, if you’re thinking about holiday shopping, I do urge you to consider buying from your local, small-time, human artists.  Your friends and family will really love the unique, special, thoughtful gifts you select; the artists will really appreciate your support; and you will really enjoy the warm glow you get from making everyone happy!  (If you’re local to eastern Massachusetts, you can always find my schedule of upcoming events listed on my web site.  I’d love to see you.  And if you're not in this neck of the woods, don't forget that you can always order items from my web site!)


[Pictures: The Preposterous Tarot III (The Ebullient Lacemaker);

The Preposterous Tarot XIX (The Cantankerous Gnomon);

The Preposterous Tarot XIV (The Well-Varnished Manticore), rubber block prints by AEGNydam, 2026 (all images from NydamPrints.com) plus additional photos by AEGNydam.]

No comments: